This standalone data logger measures and stores over 32,000 temperature readings from either a K, J or T type thermocouple.

The thermocouple is attached via the thermocouple socket at the base of the unit. The user can easily set up the logger and view downloaded data by plugging the module into a PC's USB port and using the supplied software. Data can then be graphed, printed and exported to other applications.

The high contrast LCD can show several different temperature variables. The user can cycle between these using the push button. The data logger is supplied complete with a long-life lithium battery, which can typically allow logging for up to 1 year.

Three different functions are available on the display – most recent logged temperature, maximum logged temperature and minimum logged temperature. The push button is used to cycle through the functions. In addition, logging and alarm status are shown using two high intensity LEDs. The display can be setup to show either °C or °F.

Setup Options
• Logger name
• °C, °F
• Logging rate (1s, 10s, 1m, 5m, 30m, 1hr, 6hr, 12hr)
• High and low alarms
• Immediate, delayed and push-to-start logging
• Display off, on for 30 seconds after button press , or permanently on
• Data rollover (Allows unlimited logging periods by
overwriting the oldest data when the memory is full)